"The Step-Up" 500W Combo
If you're ready to for a little more power in your charging setup, or if you're working with 7S or 8S batteries, this combo is The Step-Up.
The combination of the iCharger 208B and the PRC500 power supply gives you all the power you need for a 20 amp charge rate on 3S Lipos or 14 amps on 6S packs. You can power your iCharger 208B and take advantage of the second charger connection on the PRC500 to run an additional charger. Or step up even further by opting for the PRC600 Power Supply for just $10 more.
Also included in the package is a Balance Board so that you've got all your bases covered. Overall it's a savings of $30 compared to purchasing the items separately!
- Maximum charge power capacity: 350W (@ input voltage > 17V)
- Charge current range: 0.05-20.0A
- Discharge current range: 0.05-20.0A
- Input voltage range: 4.5-32V DC
- Maximum discharge power capacity: 30W
- Maximum external discharge power capacity: 600W @ 30V/20A
- Current drain for balancing: 350mA
- Balance accuracy: <10mV
- LiPo/LiIo/LiFe: 1–8 series (up to 10S LiFe in non-balanced mode)
- NiCd/NiMH battery cell count: 1-25 series
- Pb battery cell count: 1-18 series (2-36V)
- Battery setup memories: 10
- Intelligent temperature control: Yes
- PC Connectivity: USB port
- Weight: 420 g
- Dimensions (LxWxD): 143x97x25 mm
- Output power: 33A continuous, 500W
- Output voltage: 15V DC
- Input voltage: 100-240V AC (worldwide use)
- Protections: short circuit, over current, over voltage, over temp.
- Active PFC (power factor correction): 98% for 115V AC
- Efficiency: 88%
- AC power cord: Included
- Warranty: 1 year
- Weight: 1300g
- Dimensions (LxWxD): 232x108x50mm
- Shipping size: Small
Cart
You have no items in your shopping cart.
-
JST parallel charge cable.
As with other purchases here, high quality, fast service and good value....
(Review by Mark) -
Great Product! .
I am extremely new to this. I had a call tech support...
(Review by Injaznito)
Newsletter
