iCharger 4010Duo

SKU: 4010DUO
High-power charger providing 40 amps on each of two channels - or combine the two outputs in parallel for up to 70 amp charge rates!

Includes a free JST-XH balance board for each channel!
Ships today if ordered in the next
Hours
:
Mins
:
Secs

50+ available

$349.99

Product Options

Description

Details

There's a new heavyweight in the ring: the iCharger 4010Duo. With two channels available, each of which can charge at up to 40 amps simultaneously, it's like having two superchargers in one. Or combine both channels in parallel to achieve up to 70 amp charge rates!

With two JST-XH balance boards thrown in for free - one for each channel - you'll be ready to go right away.

See the latest review of the iCharger 4010Duo here on RCGroups.

Specifications

Specifications

Maximum Charge Power 2000W at >34V (1400W max. per channel)
Charge Current Range 5mA - 40A per channel (up to 70A in synchronous mode)
Discharge Current Range 5mA - 40A per channel (up to 70A in synchronous mode)
Input Voltage 9 - 50V DC
Input Current 65A
Maximum Discharge 130W per channel (up to 200W in synchronous mode)
Maximum Regenerative Discharge 1400W per channel (up to 2000W in synchronous mode)
Maximum External Discharge 1600W per channel (up to 3200W in synchronous mode)
Current Drain For Balancing 1.2A per channel (up to 2.4A in synchronous mode)
Balance Accuracy 10mV
LiPo/LiIo/LiFe 1 - 10 series
NiCd/NiMh Cell Count 1 - 25 series
Pb Battery Cell Count 1 - 18 series
Battery Setup Memories 64 user presets
Intelligent Temperature Control Yes
USB Charging Port 5V, 1A (1.2A current limiting protection)
PC Connectivity Mini USB 2.0
Dimensions 210x140x80 mm
Weight 1470g
Warranty 1 year

Reviews

Customer Reviews (34)

best support for the best chargerReview by stonezone
Quality
Value
Service
Stop reading reviews and buy this charger already. I have 2 of them and dont think i can live without them anymore. I've broken one by plugging my pack in while still in serial mode instead of parallel charging mode and progressive replaced it at only a fraction of the cost. I have to say though, DO NOT buy a meanwell power supply. The guys at Progressive have to go through them for PS warranty and they denied my dead PS twice claiming it was "dirty power". This was at 2 different locations and I've had absolutely no other issues. So instead of buying another one EVER, i spent $40 on ebay and got an old dell PS that works better than the meanwell and has been rock solid for 2 years.

so in short:
ProgressiveRC and iCharger duo == Buy now and you wont be disappointed with the support or the product.
Meanwell == never buy, they suck donkey balls. go on ebay and buy 10 power supplies for the price of 1 crap meanwell that wont be warrenteed. (Posted on 9/18/2017)
Great productReview by Richard B.
Value
Service
Quality
Been using mine for 3+ years now, never a problem. Easy to use. Is there any way to turn off the memory function? (Posted on 7/30/2017)
Great Charger and fast serviceReview by Don
Quality
Value
Service
Ordered on Wed, had charger on Fri. Wow, that was quick. I have used iChargers for several years now and they have worked well for me. Can't begin to guess how many charges I have done with my pair of 3010s but time for an upgrade. The 4010 works well, like the color screen, lot more information avail at a glance. The one complaint I have is common to iChargers and that is the 'risk' of plugging in the balance leads backward when charging 2 5S packs. If you swap pack A and pack B balance leads swapped, then you will have a problem. I mark my balance leads black and red and also mark the balance boards which helps make sure you have the correct sequence. (Posted on 7/16/2017)
Don't Buy ItReview by Huckfin
Service
Quality
Value
This was a great charger for a year then the balance port quit working. It still charges but I can't balance a pack. I've been told by several dealers the duo's don't hold up as well as the singles.

PRC Comment: Sorry you're having trouble with the charger! If you purchased it from us please contact us for out of warranty support options, otherwise you can contact the manufacturer directly at http://www.hillrc.com/Encontact.asp (Posted on 5/31/2017)
4010 duo iChargerReview by salim
Quality
Value
Service
good charger,
thanks Progressive for fast shipping. (Posted on 2/28/2016)
Great charger !Review by Alex
Service
Quality
Value
This charger is the best I have used so far! Great display of the cells voltages, internal resistance and other cool useful stuff. Should update with a battery percentage value and/or graphic representation.
Also great packaging and fast shipping.
Works great! (Posted on 10/24/2015)
WowReview by James
Quality
Value
Service
I needed something to easily balance and charge my 8s and 10s packs. Now I can do both at the same time! I glanced through the manual before purchase. But I have to say the controls are quite intuitive and easy to use. Set up, saved, and used several configurations for different packs without ever having to refer to the manual. It doesn't get any easier! I think the price is a bit high though. But I like it! Highly recommend this charger if you use LIPO cell counts over 6S. (Posted on 10/16/2015)
4010 DuoReview by Papa Budman
Service
Quality
Value
The best charger sold by the best company in the business! (Posted on 10/16/2015)
The best yetReview by Tim Procter
Value
Service
Quality
Been in the RC hobby since the early eighties and had most chargers over the years.
Having tried an iCharger 4010Duo over my recent PowerLab8 I liked it so much I sold both my PowerLab 8's and now own two 4010Duo's.
The only thing missing as quoted above is a battery percentage value. Highly recommended though, works perfect. (Posted on 9/21/2015)
Best charger I've ownedReview by Derrick
Service
Quality
Value
I own two of these units - one for backup and I've owned several different types over the years. This unit is the best, hands down, that I've owned.

ProgressiveRC has always been super helpful when I've had issues, they ship fast and I couldn't ask for a better vendor! (Posted on 8/3/2015)
Only Charger You NeedReview by Andrew
Value
Service
Quality
Until another type of battery chemistry comes to the market, the iCharger 4010 Duo is the only battery charger you need. This unit meets and exceeds my expectations on capacity, charge times, and battery voltage requirements. Order time to delivery was fast! Thanks Progressive RC! (Posted on 6/7/2015)
Excellent Charger!Review by Jason
Value
Service
Quality
cannot beat the features of this unit and power for this price. Takes abit getting use to the menu system and buttons but once you do, you're the master! (Posted on 1/29/2015)
4010 duo iChargerReview by William
Quality
Value
Service
Nice charger, on the high price side. So far works as advertise. (Posted on 9/14/2014)
CEOReview by Kevin Rychlik
Value
Service
Quality
Great charger (Posted on 9/10/2014)
So far I am impressedReview by Chuck Burmester
Value
Service
Quality
Purchased the 4010 Duo after using Hyperion chargers to date. I am very pleased with the icharger and am thinking of picking up another one.
I also like the fast shipping of ProgressiveRC. I will be a return customer.
Thanks, Chuck (Posted on 5/22/2014)
Not Disappointed!Review by Joe
Value
Service
Quality
I have been looking at getting this charger for quite some time now and finally pulled the trigger. It has not disappointed! I love the features and ease of use. The LCD screen shows me all I need to know with no fumbling around to get to it. Having essentially two very capable chargers in one compact unit is the win!
Loving this charger! (Posted on 4/21/2014)
AwesomeReview by Hisham
Value
Service
Quality
A little on the expensive side.
Very good chrager probably the best on the market (Posted on 4/7/2014)
4010duoReview by Gary
Value
Service
Quality
Awesome charger! The charger is very well built. As a new Lipo user I would have appreciated some information on handling batteries, in particular storing Lipo's. (Posted on 2/5/2014)
Great Charger!Review by David
Value
Service
Quality
An amazing charger with heaps of power!

Only thing missing IMO is a battery percentage value, other than that tiny preference there is nothing bad about this charger.
It's fast balancing, 1000w per channel and all other information displayed onscreen is the best I've used.

ProgressiveRC Comment: Battery percentage cannot be accurately estimated for every lipo as it varies by cell. We've looked to integrate this feature, but are not satisfied with the accuracy of the current algorithms to estimate this in the face of changing lithium chemistries.
(Posted on 2/2/2014)
icharger 4010Review by itay
Value
Service
Quality
little slow the respawn on mail

but shipping was very fast to israel

thanks (Posted on 12/14/2013)

Items 1 to 20 of 34 total

per page
Page:
  1. 1
  2. 2

Write Your Own Review

You're reviewing: iCharger 4010Duo

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Service
Quality
Value

Manual

Videos

iCharger Tips and Tricks: