Illuminated AC Switch for PRC Cases

Pre-wired AC Switch addon for PRC Cases

9 available




This illuminated switch is a upgrade that lets you easily add a on/off power switch to your PRC Charging case.

Just drill a hole with a 7/8" drill bit, pass the pre-wired switch and wires through the hole and press the switch in place.

Wiring the switch is as easy: First, making sure there is no AC power plugged in to the case, disconnect and remove the black line wire in your case, with one quick disconnect at the AC adapter, and one ring terminal on the power supply. Now simply connect the black wire with the quick disconnect from the switch cabling where you removed the wire from the AC adapter, and connect the black and white wires with spade connectors to the Line (black wire) and Neutral (white wire) AC terminals on your power supply, and you are done!

Depending on the thickness of material you may need to clip down the tabs to length. Recommended installation in a deck involves clipping tabs to length, and adding some hot glue on the underside of the deck around the switch for extra security.

This product is compatible with our HD AC Adapters. If using a standard AC adapter, you will need to replace the crimp connector with a smaller 0.187" QD


Write Your Own Review

You're reviewing: Illuminated AC Switch for PRC Cases

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars