Parallel Charge Board for JST-XH & EC5

Simply click on above image to view full picture

Zoom Out
Zoom In

Parallel Charge Board for JST-XH & EC5

SKU: AC-PCBJE5
Value
Service
Quality
24 Review(s)

Availability: 36 in stock. In Stock

$19.99

Customer Reviews (24)

Great productReview by Steve
Service
Quality
Value
Great product and super fast shipping. (Posted on 4/26/2013)
Parallel Charge Board - the way to goReview by James
Service
Quality
Value
These are rock solid. Eliminates the clutter from multiple parallel wires. I use these in the PRC case and with two iChargers. Great setup. Everyone at the flying field comments on the compact and efficient setup. (Posted on 1/20/2013)
Excellent parallel board for EC5Review by Godfrey
Value
Service
Quality
Having converted to EC5 from Deans (I know.. what took me so long?). There is definitely less arcing I gotta deal with. Having been already electrocuted with deans plugs, it was the last straw and it was time to go with EC5s. This parallel charger coupled with my FMA Powerlab 8 is one unbeatable combination. I can charge four 6s 5000 mah Lipos in about an hour. I now wonder if I should get that 11000 mah 6s lipo and really run the Powerlab through it's paces.. (Posted on 10/21/2012)
.Review by Troy
Quality
Value
Service
Great product, as stated above having the leads a few inches longer would even make it better (Posted on 7/10/2012)
my board failed first connectionReview by joe
Quality
Value
Service
i bought this plug and connected 2 six cell packs to it and less than 30 seconds in the thing started smoking and nearly ruined 500 dollars in batteries. after further investigation it looks as though a bad solder joint or over solder spill shorted the connector.
i checked continuity between positive and negative and sure enough it has meaning that it shorted my battery upon connection causing the board to melt.
although it seems to be of good build quality this one slipped by with poor quality control and very sloppy solder joint on input side

ProgressiveRC Comment: We perform a very thorough QC of all products during assembly and prior to shipping which should catch certainly catch an error of this nature. The vast majority of parallel charge board errors occur due to a balance connector inserted one pin over from the intended location. The second most common cause of problems is connection of packs with very disparate voltages. In the event of a short on 6S the first pack connection would result in some instantaneous smoke and vaporization of the 30A copper trace. If the packs were far different voltages the event would take a few more seconds more as described above. We are happy to troubleshoot and replace as required products in these situations, but we have not been contacted regarding this issue. (Posted on 4/5/2012)
Great ProductReview by Steven
Quality
Value
Service
I received this from Dave a few weeks ago and can say that this product simply works. I charged 6, 6S 3800mah 25C Gens Ace packs on this board with no problems. Great product! (Posted on 3/4/2012)
Parallel charging is the bestReview by Ryan
Value
Service
Quality
Great board. Good deal (Posted on 2/11/2012)
Awesome!!!!!Review by Kevin
Value
Service
Quality
Awesome product
And great people to stand behind the product (Posted on 1/30/2012)
P350 Power SupplyReview by Radames Rodriguez
Value
Service
Quality
GOOD ..... Very nice . (Posted on 1/25/2012)
Absolutely essential!Review by Brian Redmon
Value
Service
Quality
The board is high quality and makes charging in parallel super easy. If your balance leads are short you may want to pick up some balance lead extensions. (Posted on 10/5/2011)

Items 11 to 20 of 24 total

per page
Page:
  1. 1
  2. 2
  3. 3

Write Your Own Review

You're reviewing: Parallel Charge Board for JST-XH & EC5

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Value
Service
Quality