- I appreciate the detailed product overview/background on youtube - that really sold it for me. It was high priced at $80, but understanding my model's power system with confidence is pretty important to me. Thunder power taps require an adapter.
A must-have meter designed by Wayne Giles (find discussion thread on RCGroups) for measuring lipo individual cell and whole pack IR. We can finally call BS on inflated lipo discharge rate claims! Was surprised to find some cheaper Chinese branded packs to have lower IR than some of the brand-name packs. A real eye opener. Can also be used to track pack/cell health over time.
My only complaint would be the switch to change from cell to pack mode - it looks like it will be easy to break off if the meter is just thrown haphazardly in a flight box. But I believe this is being changed in V2.
Being able to measure the Internal Resistance of our batteries at any time without charging is a great benefit. They can be checked right before flight or right after flight or after they have been soaked at some standard temperature, thereby allowing improved comparisons of various batteries from different suppliers.
For the man who has everything.
This is a pretty specialized piece of equipment, since it ONLY measures the battery internal resistance. And it costs as much as a pretty good charger.
However, my experience is that while a LiPoly battery may show only a slight loss of capacity as it ages (both cycles and calendar months), the main problem is the increased resistance hurting the peak power. The pack does just fine on the slow discharge that most chargers can do, but the voltage drops so much under load that the ESC cuts out in just a few seconds of running time.
I compared this meter against the voltage drop in some actual motor runs and it seems pretty accurate. It does read about 50% higher than the ESR reading from my iCharger 306, but its also doing a much higher current load test than the charger does. (the short pulse, low current ESR of a battery is lower than it is with a higher load pulse)
The only thing I would change on this is to also have a balance tap connector with pins to fit the narrower Thunder Power connectors.
Nice tool Submitted by Mick on 12/14/2011
ESR meter Submitted by Rumple on 11/26/2011
ESR Meter Submitted by Jim Oddino on 9/23/2011
works like it should! Submitted by Bob Parks on 9/17/2011