ISDT P10
ISDT P10
ISDT P10
ISDT P10
ISDT P10
Klicken zum Vergrößern

ISDT P10

P10
6971337051031
Fully-featured, portable and affordable dual-output charger!
€62,95

Der kleinste Eintrag in der P-Serie von ISDT, der P10, ist ein Zweikanal-6S-Ladegerät mit einer Leistung von 500 W.

Jeder Kanal kann unabhängig betrieben werden und maximal 10 A abgeben, oder Sie können die beiden Kanäle parallel kombinieren, um eine synchrone Balance-Ladung mit bis zu 16 A zu erreichen.

Getreu der Tradition von ISDT wurde dieses Ladegerät so konstruiert, dass es so klein und leicht wie möglich ist. Das fortschrittliche Luftkonvektionsdesign und ein solides Gehäuse aus Magnesiumlegierung sorgen für effektive Kühlung selbst in einem so kleinen Paket.

Das hochauflösende 3,5-Zoll-IPS-Display bietet zahlreiche Informationen zu Ihren Batterien. Mit dem BattGO-System und der ISDT-App, die eine drahtlose Verbindung über Bluetooth herstellt, stehen noch mehr Optionen zur Verfügung.

Mehr anzeigen
Weniger anzeigen
Charge Power 250W per channel, 400W synchronous
Charge Current 0.2-10A per channel, 0.2-16A synchronous
Input Voltage 10-30V DC
Max Input Current 20A
Balance Current 0.5A
Supported Chemistries LiFe/Li-Ion/LiPo/LiHV 1-6S, Pb 1-10S, NiMH/NiCd 1-16S
Dimensions 91x91x47mm
Weight 250g

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
P.L.
Good Enof ISDT P10 charger

i bout the 2 p10 chargers to keep at a local track, so far I've been happy with then. Even tho i was Aware of the lack of Discharging before purchase. I did pick up a stand alone discharging bank covering my need. How ever i am annoyed i can only see battery resistance during charging, and pissed that there's no reverse polarity protection. I mean really. So after blowing up channel 1 on 2s. Omg lots of smoke. i will be dissecting it to figure out which of the two probably both fets need replacing. Hopefully It's only the fets, well should be anyways. Sad thing is thats all it need is a Zener diode and a relay. Bam reverse polarity protection. Will probably buy Again. as its not a bad little charger, and it fits my needs at the track. Beyond that Awesome screen easly to read an understand. Would be nice it the manual told you more then how to plug it in and charge.

but come on don't ever not have reverse battery protection built in to the board. its like a car with out reverse, and don't say the xt60 plug ends on the charger is reverse battery protection. its not and has never been

G
Gary Mann

very satisfied

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
P.L.
Good Enof ISDT P10 charger

i bout the 2 p10 chargers to keep at a local track, so far I've been happy with then. Even tho i was Aware of the lack of Discharging before purchase. I did pick up a stand alone discharging bank covering my need. How ever i am annoyed i can only see battery resistance during charging, and pissed that there's no reverse polarity protection. I mean really. So after blowing up channel 1 on 2s. Omg lots of smoke. i will be dissecting it to figure out which of the two probably both fets need replacing. Hopefully It's only the fets, well should be anyways. Sad thing is thats all it need is a Zener diode and a relay. Bam reverse polarity protection. Will probably buy Again. as its not a bad little charger, and it fits my needs at the track. Beyond that Awesome screen easly to read an understand. Would be nice it the manual told you more then how to plug it in and charge.

but come on don't ever not have reverse battery protection built in to the board. its like a car with out reverse, and don't say the xt60 plug ends on the charger is reverse battery protection. its not and has never been

G
Gary Mann

very satisfied

Einkaufswagen

×