Ausverkauft
Matek H743-Wing V3 Flugcontroller
Matek H743-Wing V3 Flugcontroller
Matek H743-Wing V3 Flugcontroller
Klicken zum Vergrößern

Matek H743-Wing V3 Flugcontroller

FC-MH743W
Versatile and powerful FC is ready for anything!
€112,95

Der H743 WING V3 Flight Controller von Matek verfügt über neue Funktionen und Verbesserungen gegenüber dem Original.

Dieser FC verfügt über eine STM32H743VIT6-MCU mit 480 MHz, zwei Gyros ICM42688P und ICM42605 (SPI4), ein DPS310 (I2C2)-Barometer und vieles mehr.

Mehr anzeigen
Weniger anzeigen
MCU STM32H743VIT6
Gyro MPU6000 & ICM42605
Barometer Yes
OSD Yes
Input Voltage 3-8S LiPo
BEC 3.3/5/9/12V
Dimensions 54x36x13mm (30.5x30.5mm mounting holes)
Weight 30g

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
BobW
A terrific FC, but requires a lot of time to get working with ArduPlane.

I have not yet installed it in my airplane, but it is a quality piece of engineering. Once knew what to do, I performed the actual install of ArduPlane firmware in about 10 minutes, but that was after it took about 4 hours of reading conflicting directions on the web. Once installed, I used Config Mgr and the FC worked perfectly. Also, I prefer to use the pin headers so that I can plug and remove devices, especially when troubleshooting, and it took about 3 hours to cut the headers to size and solder to the board. IMHO forcing me to solder my headers on is a total waste of my time and the board should come with headers.

T
T.F.

Progressive does a fantastic job. Bought many products over the years. Product was sensibly packaged and shipped very quickly. A++++

D
Denis Barysovich

Matek H743-Wing V3 Flight Controller

A
Artemio Garcia
Great products fast shipping

The product showed up fast and well packaged great place to order products.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
BobW
A terrific FC, but requires a lot of time to get working with ArduPlane.

I have not yet installed it in my airplane, but it is a quality piece of engineering. Once knew what to do, I performed the actual install of ArduPlane firmware in about 10 minutes, but that was after it took about 4 hours of reading conflicting directions on the web. Once installed, I used Config Mgr and the FC worked perfectly. Also, I prefer to use the pin headers so that I can plug and remove devices, especially when troubleshooting, and it took about 3 hours to cut the headers to size and solder to the board. IMHO forcing me to solder my headers on is a total waste of my time and the board should come with headers.

T
T.F.

Progressive does a fantastic job. Bought many products over the years. Product was sensibly packaged and shipped very quickly. A++++

D
Denis Barysovich

Matek H743-Wing V3 Flight Controller

A
Artemio Garcia
Great products fast shipping

The product showed up fast and well packaged great place to order products.

Einkaufswagen

×