PRC Nomad Case
- Made in the USA, the PRC Nomad Case is the perfect solution for the transport and storage of your charger and accessories.
Mit einer Grundfläche im Stil einer Aktentasche bietet Nomad eine vertikale Tiefe von 20 cm und bietet Ihnen eine unvergleichliche Aufbewahrungslösung und einen riesigen Arbeitsbereich in einem Koffer.
Wählen Sie zwischen Spec-Ops Black, Solar Orange, Nuclear Yellow oder Battleship Grey. Wofür Sie sich auch entscheiden, Sie werden neidische Blicke auf sich ziehen. Sowohl der untere als auch der obere Innenraum des Koffers sind mit einer permanenten Auskleidung versehen, die die Installation jeglichen Zubehörs mithilfe einfacher Klettbänder ermöglicht. Genauso einfach ist es, die Gegenstände in Ihrem Koffer neu zu ordnen oder sie zu Hause oder auf dem Feld zu entfernen!
Dank der zahlreichen verfügbaren Zubehörteile können Sie den Nomad ganz einfach von einem leeren Koffer in Ihre perfekte Ladestation verwandeln.
- Material: 6 mm Polypropylen
- Merkmale: Wasserdicht, luftdicht, Druckentlastungsventil, geformte Vorhängeschlosslöcher, Neopren-O-Ring-Dichtung
- Gewicht: 3470g
- Außenmaße (LxBxT): 20x16x7,5 Zoll
- Innenmaße (LxBxT): 18x13x6,5 Zoll
- Innentiefe des Deckels: 1 1/2 Zoll
- Standards: Erfüllt MIL-SPEC und IP-Standards 67
- Garantie: Lebenslange Gehäusegarantie – hergestellt in den USA
Customer Reviews
Working with the guys to get this custom case designed with a piece of cake. They gave me exactly what I needed and made assembly a piece of cake. All in all, it only took about 2.5 hours to have a full functioning case. Thanks again guys!
I’ve been eyeballing Progressive RC’s charging cases for years, but I kept putting it off. Fast forward to Spring ‘21 when I finally decided to contact them for one of their partial Signature Case builds as I already had an iCharger 406 and a TDK Lambda HWS1500-24 power supply.
Unfortunately, when I went to look for the specific Signature build in the Nomad (XL) case I saw that it was discontinued. I contacted them and Yarden started working with me to initially recreate then ultimately design and build a custom deck for me complete with my last name. Yarden even took the time to tidy up the component placement so the deck looked clean without me having to ask; this workmanship and thoughtfulness are so hard to find these days!
When I received the case I lifted the deck to inspect the wiring job and was very pleased with the work. I’m admittedly OCD when it comes to anything I work on and the components were installed and wired like I would’ve done it.
I did end up installing two additional components into the case in the name of longevity. I run my PS at 30V and the case has two 60mm 24V exhaust fans mounted in a pull configuration. Yarden advised me that the fans would be spinning a bit faster at 30V and may have a slight decrease in life, but it would be fine. I ended up installing a stepdown voltage reducer with a 24V output. I’m not sure what the panel mounted USB charger/voltage display’s max voltage input is, but it’s showing a steady 24V.
The other item that I installed is a small centrifugal (radial) fan. I tested the whole rig by running a pair of 6,500 mAh 4S LiPos through a storage to 100% charge at a conservative 2C, discharge at 40A to LVC through an external resistor at ~600W, back to 100% charge at 2C, discharge down to LVC, and back to storage. Ambient temps were 75°F. The iCharger was showing a max of 129°F at some points. I was guessing that the air just in front of the front face of the iCharger was stagnant so that’s why I added the radial fan. I ran the same charging cycle and only saw 118°F. Nice!
My only regret is not working with the awesome crew at PRC and investing in a case sooner!
The case is of superb quality. Progressive rc even called me to clarify part of my order and shipped quickly.
Absolutely worth the money. My setup is two 800 watt power supplies, an icharger 4010 duo and 306b. Everything fits in nice and compact and the deck on is just awesome.
I love my new charging case.Very Nice!!!
Customer Reviews
Working with the guys to get this custom case designed with a piece of cake. They gave me exactly what I needed and made assembly a piece of cake. All in all, it only took about 2.5 hours to have a full functioning case. Thanks again guys!
I’ve been eyeballing Progressive RC’s charging cases for years, but I kept putting it off. Fast forward to Spring ‘21 when I finally decided to contact them for one of their partial Signature Case builds as I already had an iCharger 406 and a TDK Lambda HWS1500-24 power supply.
Unfortunately, when I went to look for the specific Signature build in the Nomad (XL) case I saw that it was discontinued. I contacted them and Yarden started working with me to initially recreate then ultimately design and build a custom deck for me complete with my last name. Yarden even took the time to tidy up the component placement so the deck looked clean without me having to ask; this workmanship and thoughtfulness are so hard to find these days!
When I received the case I lifted the deck to inspect the wiring job and was very pleased with the work. I’m admittedly OCD when it comes to anything I work on and the components were installed and wired like I would’ve done it.
I did end up installing two additional components into the case in the name of longevity. I run my PS at 30V and the case has two 60mm 24V exhaust fans mounted in a pull configuration. Yarden advised me that the fans would be spinning a bit faster at 30V and may have a slight decrease in life, but it would be fine. I ended up installing a stepdown voltage reducer with a 24V output. I’m not sure what the panel mounted USB charger/voltage display’s max voltage input is, but it’s showing a steady 24V.
The other item that I installed is a small centrifugal (radial) fan. I tested the whole rig by running a pair of 6,500 mAh 4S LiPos through a storage to 100% charge at a conservative 2C, discharge at 40A to LVC through an external resistor at ~600W, back to 100% charge at 2C, discharge down to LVC, and back to storage. Ambient temps were 75°F. The iCharger was showing a max of 129°F at some points. I was guessing that the air just in front of the front face of the iCharger was stagnant so that’s why I added the radial fan. I ran the same charging cycle and only saw 118°F. Nice!
My only regret is not working with the awesome crew at PRC and investing in a case sooner!
The case is of superb quality. Progressive rc even called me to clarify part of my order and shipped quickly.
Absolutely worth the money. My setup is two 800 watt power supplies, an icharger 4010 duo and 306b. Everything fits in nice and compact and the deck on is just awesome.
I love my new charging case.Very Nice!!!