O3 Armer
O3 Armer
O3 Armer
Click to zoom in

O3 Armer

AC-O3A
No flight controller? No problem! Easily arm a DJI O3 Air Unit with this simple device
£33.00

If you've ever wanted to add HD FPV to an RC car, boat, plane or anything else without a flight controller, the O3 Armer is exactly what you need!

The DJI O3 video system will not output its full power unless there is an 'armed' signal sent to it, like you'd get from a flight controller. The O3 Armer sends this 'armed' signal after being powered on for ~20 seconds, automatically.

Just plug in your O3 Air Unit with its stock cable, power the O3 Armer from a 2S-4S LiPo and you're set. There is also a JST-XH connector for a 5V fan to keep your O3 cool, and an optional solder pad which accepts a PWM input, allowing you to turn the O3 Air Unit on/off and toggle low/high power mode.

Read More
Read Less
Input Voltage 7-17V DC
Battery Connection XT30
Air Unit Connection 6-pin JST-SH
Fan/5V Connection 2-pin JST-XH

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Rick Maddox
No Flight Controller Needed !!!

I'm usning one of these on a airplane that I just did not want the hassel of putting a flight controller in. I also wanted to keep the weight down.

I'm using a CADDX Vista air unit with older Goggles V2. It works great with the O3 Armer.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Rick Maddox
No Flight Controller Needed !!!

I'm usning one of these on a airplane that I just did not want the hassel of putting a flight controller in. I also wanted to keep the weight down.

I'm using a CADDX Vista air unit with older Goggles V2. It works great with the O3 Armer.

Your cart

×