You have no items in your shopping cart.
Description
Details
Get a taste of the custom shop, without the wait. This Signature Series case comes complete with our ProgressiveRC Charger Interface Panels, giving you a full set of connections for each channel available at the deck with no additional cabling required to start charging a XT60 or EC5 battery. With the included banana plugs, you can also charge any other battery - or parallel charge - with a standard charge cable or board. This truly makes for an unbelievably convenient portable charging solution! Also included are an integrated AC switch, a dual-port USB charger with built-in voltmeter, and even a DC input port for field charging.
The combination of the iCharger 308Duo and the Mean Well RSP-1000-24 is ready for any situation you can throw at it. Need to charge 6S packs at the same time as your 3S? Working with batteries of different chemistries? The independent output channels on the charger make this a breeze, but if you need to just charge a bunch of high-capacity packs as fast as possible, it's a piece of cake to parallel the two channels and charge at up to 50A in sync mode.
Included in the package are all the accessories you need to create an unbeatable portable charge solution!
Since all our cases are built to order, your case may take a day or two to get ready, but it's worth the wait.
Specifications
Specifications
| Maximum Charge Power | 900W |
|---|---|
| Charge Current Range | 0.05-30A |
| Input Voltage | 90-264V AC |
| Maximum Discharge | 80W per channel |
| Balance Accuracy | 10mV |
| LiPo/LiIo/LiFe | 1-8S |
| NiCd/NiMh Cell Count | 1-25S |
| Pb Battery Cell Count | 1-18S |
| USB Charging Port | 2 @ 2.1A/5V |
| Dimensions | 15x12x7 inches |
| Assembled Weight | approx. 10 pounds |
Reviews
Customer Reviews (2)
- A+Review by Tim
Excellent customer service and excellent quality build. Chad was very patient and also very thorough in explaining everything. I would not hesitate to buy from Progressive RC again. Great experience overall. (Posted on 6/8/2019)Quality Value Service - Better than I expected .... and I expected a LOT!Review by Ray
Now that I have had this rig for a while and had time to explore it's features and capabilities, I'm fairly impressed with how well everything works. The extra money spent on getting everything installed into one custom (Signature) case, was WELL spent. No exposed parts or nightmare of wires that one would normally see if simply mounted on a workbench or table. It's a really attractive setup. I picked up a bunch of accessories including the 6' DC power cable with the battery clamps so I could use this in the field while connected to the car/truck battery. Try doing that without everything being mounted in a case. I have yet to attach the case to a tripod but it's only a matter of time.Quality Value Service
Now a few words about customer service. It's great! While I have only spoken with 3 people there (Chadd, Yarden and David), Every one of them were patient with all the MANY questions I asked and if I asked something they couldn't immediately answer, it wasn't long before they found the answer for me. Customer service is everything as far as I'm concerned. These parts can be purchased at many places but I make my purchases based on how I'm treated when I call. Kudos to everyone at Progressive RC. Well done! (Posted on 3/29/2019)
Write Your Own Review
Videos
iCharger Tips and Tricks
Product Spotlight: The PRC Case Family
