Sold out
ToolkitRC M6D
ToolkitRC M6D
ToolkitRC M6D
ToolkitRC M6D
ToolkitRC M6D
ToolkitRC M6D
ToolkitRC M6D
Click to zoom in

ToolkitRC M6D

M6D
A pocket-sized dual-channel 500W charger, all at an unbeatable price!
$69.99

The perfect on-the-go charger! It's small enough to fit in your pocket, but it's a dual channel charger capable of putting out up to 500W, and even offer sync mode to get charge rates up to 25A!

A true pocket powerhouse, the M6D includes an optimized heat dispersing system to dissipate high power heat in no time! You will find an easy-to-navigate system, integrated USB interface, and lots of cool features that make the M6D an excellent charger.
Read More
Read Less
Input Voltage 7-28V DC
Dimensions 98x68x35mm
Balance Accuracy <0.005V
Current Drain (Balancing) 800mA
Discharge Current Range 0.1-3A per channel
Input Current 30A
LiPo/LiIo/LiFe 1-6S
Charge Power (Max) 500W
Discharge (Max) 12W
Regenerative Discharge (Max) 500W
Cell Count (NiCd/NiMh) 1-16S
Pb Battery Cell Count 1-10S
PC Connectivity USB (cable included)
USB Charging Port 2.1A @ 5V DC
Weight 220g
Charge Current Range 0.1-15A per channel (0.1-25A synchronous)

Customer Reviews

Based on 9 reviews
89%
(8)
0%
(0)
11%
(1)
0%
(0)
0%
(0)
R
RC prop head
ToolkitRC M6D

Very well constructed. The user interface is very intuitive/easy to use. Good detailed information is displayed during the charging process. So far it’s working out well for me…

c
colin hoover
not sure yet

still working on case so don't know yet

K
Keith Miller
Small and compact but very poorly written manual.

We've just started going through the menus to understand the flexibility. So far it will meet our needs, but the manual is very poorly written. It's obviously a poorly interpreted English translation from some other language without a thorough review by keen US eye.

r
richard stebbins
Charger works great

Must have for charging multiple batteries

R
Ryan J
Awesome charger with a lot of features

I'm using this as a field charger and this is awesome. Plugged into my car I can set the minimum input voltage to 10.5 volts so I don't have to worry about draining my car battery too low. 500W output is more than I'll need but great charger. I really like that this measures internal resistance. I've retired a couple packs because I can see that the resistance of once cell is higher than all the others. Super easy to use and monitor lipos. I wish the colored outline of each channel was easier to see so you could see which channel you were in a little better but that's a minor complaint. Definitely buy this charger.

Customer Reviews

Based on 9 reviews
89%
(8)
0%
(0)
11%
(1)
0%
(0)
0%
(0)
R
RC prop head
ToolkitRC M6D

Very well constructed. The user interface is very intuitive/easy to use. Good detailed information is displayed during the charging process. So far it’s working out well for me…

c
colin hoover
not sure yet

still working on case so don't know yet

K
Keith Miller
Small and compact but very poorly written manual.

We've just started going through the menus to understand the flexibility. So far it will meet our needs, but the manual is very poorly written. It's obviously a poorly interpreted English translation from some other language without a thorough review by keen US eye.

r
richard stebbins
Charger works great

Must have for charging multiple batteries

R
Ryan J
Awesome charger with a lot of features

I'm using this as a field charger and this is awesome. Plugged into my car I can set the minimum input voltage to 10.5 volts so I don't have to worry about draining my car battery too low. 500W output is more than I'll need but great charger. I really like that this measures internal resistance. I've retired a couple packs because I can see that the resistance of once cell is higher than all the others. Super easy to use and monitor lipos. I wish the colored outline of each channel was easier to see so you could see which channel you were in a little better but that's a minor complaint. Definitely buy this charger.

Your cart

×