HDZero Freestyle V2 Digital Video Transmitter
HDZero Freestyle V2 Digital Video Transmitter
Click to zoom in

HDZero Freestyle V2 Digital Video Transmitter

AC-HZF2
The V2 features a more durable design to go along with it's amazing video signal!
1 122 kr

The HDZero Freestyle V2 VTX is a 2nd generation 5.8GHz digital video transmitter that can fit most 3.5-inch and 5-inch drones. The CNC case protects all the sockets well, providing durability, RF shielding, and improved signal integrity.

A wire harness is included for solderless connection for power and MSP UART port. The included retention bar and screws secure the antenna and MIPI cable. The VTX supports 720p60,1080p30, 540p60 and 540p90 video modes, and has a maximum 1W RF output at the R1 channel if unlocked or authorized with a license or approval.

 

NOTE: An antenna must be installed properly before power is applied to the transmitter. Powering on without a correctly installed antenna may easily burn the transmitter. Power spikes from other components such as ESC's can also damage the transmitter if powered directly from battery voltage. Such damage will not be covered under warranty.

Video Transmission Legality: The use and operation of this product in the USA and many other countries may require a license. Some countries may not allow its use at all. In the USA you must have a HAM radio license to use this transmitter above the 25mW power level. It is the responsibility of the end user to comply with all applicable laws and regulations of their government.

Read More
Read Less
Input Voltage 7-25V DC
Power Output 25mW/200mW (higher power unlockable up to 1W)
Frequency 5.725-5.850GHz
Antenna Connection u.FL
Power Draw 6-15W
Dimensions 30x29x14mm (20x20mm mounting)
Weight 22.3g

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
K
Kevin Devaney
HDZERO freestyle v2

I have not been able to evaluate the transmitter. During installation I needed to change the antenna due to polarization and the u.fl connector lifted from the pcb. I sourced a replacement and have replaced the original.
I have used u.fl antenna connectors before and did not have issues removing and installing antennas with no damage.
Just use extreme caution when removing the u.fl connector or learn how to solder smd's

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
K
Kevin Devaney
HDZERO freestyle v2

I have not been able to evaluate the transmitter. During installation I needed to change the antenna due to polarization and the u.fl connector lifted from the pcb. I sourced a replacement and have replaced the original.
I have used u.fl antenna connectors before and did not have issues removing and installing antennas with no damage.
Just use extreme caution when removing the u.fl connector or learn how to solder smd's

Your cart

×