Sold out
Click to zoom in
Eachine Falcon 250 CC3D Flight Controller
AC-EFCB
Alternative available here: Betaflight F4 Flight Controller
This exceptional flight controller provides a crisp feel when flying multirotors, and is easy to install on your airframe. It comes completely assembled with no soldering required, and includes a harness to connect any standard PWM receiver.
You can use a standard mini-USB cable to upgrade firmware and configure all the unique settings for your rig with the open source OpenPilot software - all major operating systems are supported.
You can use a standard mini-USB cable to upgrade firmware and configure all the unique settings for your rig with the open source OpenPilot software - all major operating systems are supported.
Read More
| Dimensions | 36x36x10mm |
| Weight | 5g |
| 3-Axis Gyroscope and Accelerometer | MPU-6000 |
| RC Inputs | 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers |
| Receiever Port Functions | 6 PWM input channels or combined PPM stream, 4 PWM output channels |
| Main Port Functions | Serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites |
| Flexiport Functions | Serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development) |
| Outputs | 10 PWM outputs to servos or ESC’s, or for camera stabilization |
| Camera Stablization | Up to 3-axis camera mounts with stabilization and manual control from any of configured receivers |
| Onboard Memory | 4 MBit |