Battery Clamp Charge Cable
Whether you're charging a car battery, or using the battery to power your charger, you can never have enough flexibility in your hookup. This heavy-duty cable gives you two and ahalf to six feet of cabling from the battery clamps to your output. Professional grade silicone wire is ready for huge current loads, and the positive and negative wires are attached together with heat shrink to make it easy to route the cable wherever you need.
Heavy duty clamps let you make an easy connection to the terminals on your battery, while at the other end of the cable you'll have the connector of your choice to make the connection to your charger.
- Input Connector: Alligator clamps
- Output Connector: Male XT60 (male housing with female bullets); Male XT90 (male housing with female bullets); Male EC5 (male housing with female bullets); bare wire
- Length: 2.5/6'
| Length | 6' |
| Gauge (Wire) | 12 AWG |
Customer Reviews
This is my 2nd case its the best charger I have!!!
The custom made cases for my Hardline Dual X6 2000W Combo and Hardline 406Duo 2000W Combo are so perfect and fantastic and fun to recharge.
It can't be more perfect than this. A really cool and expertly crafted charger case. I love this case.
This is great for super low amperage pull (like a couple mini quad batteries), but if you plan on pulling anything over 10 amps with this, expect a hot cable and significant voltage sag.
My hope was to use this for powering my charging case (upwards of 40-50a) right off my lithium battery bank in my van, but the cables almost melted when I tried stress testing it. voltage at the batteries was about 13.8 and voltage at the charging case was 9.5-10v.
Legitimately nothing against the folks at PRC, everything they've done for me has been great! It's no one's fault that XT60 can't handle a larger gauge wire, because that's the main thing this puppy needs.
Customer Reviews
This is my 2nd case its the best charger I have!!!
The custom made cases for my Hardline Dual X6 2000W Combo and Hardline 406Duo 2000W Combo are so perfect and fantastic and fun to recharge.
It can't be more perfect than this. A really cool and expertly crafted charger case. I love this case.
This is great for super low amperage pull (like a couple mini quad batteries), but if you plan on pulling anything over 10 amps with this, expect a hot cable and significant voltage sag.
My hope was to use this for powering my charging case (upwards of 40-50a) right off my lithium battery bank in my van, but the cables almost melted when I tried stress testing it. voltage at the batteries was about 13.8 and voltage at the charging case was 9.5-10v.
Legitimately nothing against the folks at PRC, everything they've done for me has been great! It's no one's fault that XT60 can't handle a larger gauge wire, because that's the main thing this puppy needs.