Fan Grills for PRC Cases
- Need ventilation in your charging case? Apply these fan grills over a vent hole and you're all set.
Fan Grills for PRC Hardline Cases
Give your charging setup all the air it needs to keep cool with these high-quality and stylish black grills.
Line up your power supply's fan, cut a hole in the side of your case, and attach the grill with the included screws. It's that simple to provide additional ventilation.
Specifications:
- Small Grill Dimensions: 40x40mm (screw holes); 40mm diameter - recommended for our smaller power supplies, up to the PRC500, and two can be used for the Mean Well RSP-1000-24
- Medium Grill Dimensions: 50x50mm (screw holes); 50mm diameter - recommended for the IOTA or PowerMax units, and the Mean Well SE-1000-24 and RSP-1500-24
- Large Grill Dimensions: 90x90mm (screw holes); 90mm diameter - used as a rear exhaust for our case set-ups with the Powerlab8 or iCharger Duos. Typically paired with active 92mm fan, available separately.
- Mounting Hardware: 4 screws included, pre-drilled pilot holes recommended