But the real magic of this flight controller lies in its twin gyro configuration. The TwinG uses two identical gyros oriented side by side with one offset 90 degrees from the other. Betaflight uses gyro fusion to blend and average the information from both gyros to send a much cleaner signal to the PID loop controller! That means less noise and fewer oscillations across the throttle band without adding any delay! Betaflight software filters can be lowered in most cases as well, which brings a significant decrease in delay.
With plenty of processing power and UARTS, this is also the perfect flight controller for long-range GPS builds. And the TwinG configuration makes it the perfect FC for builds like macro quads, cinematic filming rigs and X-class racers that are a bit trickier to tune.
Add in a high performance 40A ESC and you've got a stack that's ready to take you to new heights!
|Dimensions||31x31mm (20x20mm mounting)|
|Input Voltage (Max)||2-6S LiPo|
|3-Axis Gyroscope and Accelerometer||2x ICM20689|
The iflight D series F7s are my go to stack for DJI builds. I use the mini for 3 inch builds and the 30x30 for 5 inch. They make the build easy as pie, all you have to do is solder on the battery lead , crossfire (even easier if you use the built in air unit receiver) and the motors. The rest is just the supplied connectors. As far as the flight controller goes, i haven’t found one i like better. The F7 and dual gyro config is hard to beat. That bad boy flies smooth as silk. Only time i buy anything else is when they are sold out. Then i get a TMotor F7 or a Mamba HD.