ISDT FD-200 200W Discharger

SKU: AC-FD200

Easily discharge your packs to storage voltage with this dedicated discharger

$78.99 $68.99

Quantity:

Quantity must be 1 or more

Description

The new FD-200 external discharger takes the strain of discharging away from your charger and puts it where it belongs - on a dedicated device that's built to withstand the heat.

This compact unit will discharge your 2S-8S LiPos at up to 25A, up to a total power output of 200W. You can easily adjust the discharge current and termination voltage from your phone using the ISDT app and a Bluetooth connection.

Specifications

Input Voltage	7-35V
Dimensions	140x100x60mm
Discharge Current Range	5/10/15/20/25A
LiPo/LiIo/LiFe	2S-8S
Discharge (Max)	200W
Weight	790g

Manuals

iSDT FD-200 Manual

This one works

I hope it keeps on working, the last one needed repairs after one year and quit after 3 years

Hard to learn to use

I've used the FD 200 both as a stand alone unit and with the app on my I-phone 12 and have found it hard to setup especially thru the app.

With a big battery 6S 14000mah the Fd-200 gets hot on a hot day (39 degrees C)

Quirks

A fast discharger giving you 25 amps to play with however…The app is barely acceptable - needs many improvements. You can’t leave the discharger alone. If you do, your battery will be discharged over the 3.8V. Even so low it could permanently damage the battery. If you have time to monitor, fine. If not, don’t buy.

Less adjustable

Much less adjustable than the units with the yellow XT-60 connector. The ‘smart’ ones (orange XT-60) only allow 5, 10, 15, 20, and 25 A discharge rates, even though the app allows you to reduce the rate to 1A, it will not do that and goes to 5A every time. Fairly useless for smaller batteries. My yellow XT-60 connector one would do this easily!!!

Lipo Discharger

These new Lipo batteries are a learning experience. Have to have the equipment for an successful discharge.
Thanks ProgressiveRC

1 2