ToolkitRC M6D
ToolkitRC M6D
ToolkitRC M6D
ToolkitRC M6D
ToolkitRC M6D
ToolkitRC M6D
ToolkitRC M6D
Click to zoom in

ToolkitRC M6D

M6D
A pocket-sized dual-channel 500W charger, all at an unbeatable price!
$69.99

The perfect on-the-go charger! It's small enough to fit in your pocket, but it's a dual channel charger capable of putting out up to 500W, and even offer sync mode to get charge rates up to 25A!

A true pocket powerhouse, the M6D includes an optimized heat dispersing system to dissipate high power heat in no time! You will find an easy-to-navigate system, integrated USB interface, and lots of cool features that make the M6D an excellent charger.
Read More
Read Less
Input Voltage 7-28V DC
Dimensions 98x68x35mm
Balance Accuracy <0.005V
Current Drain (Balancing) 800mA
Discharge Current Range 0.1-3A per channel
Input Current 30A
LiPo/LiIo/LiFe 1-6S
Charge Power (Max) 500W
Discharge (Max) 12W
Regenerative Discharge (Max) 500W
Cell Count (NiCd/NiMh) 1-16S
Pb Battery Cell Count 1-10S
PC Connectivity USB (cable included)
USB Charging Port 2.1A @ 5V DC
Weight 220g
Charge Current Range 0.1-15A per channel (0.1-25A synchronous)

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
R.J.
Awesome charger with a lot of features

I'm using this as a field charger and this is awesome. Plugged into my car I can set the minimum input voltage to 10.5 volts so I don't have to worry about draining my car battery too low. 500W output is more than I'll need but great charger. I really like that this measures internal resistance. I've retired a couple packs because I can see that the resistance of once cell is higher than all the others. Super easy to use and monitor lipos. I wish the colored outline of each channel was easier to see so you could see which channel you were in a little better but that's a minor complaint. Definitely buy this charger.

C
C.s.

Great communication and prompt delivery.

V
V.G.
Awesome

Great service all around with progressive fast shipping and responce

M
M.M.
Good Lipo Charger - its Two Chargers in One

Works Great - the New ToolKitRC M6D, it is a Professional Lipo Charger, its a dual charger so its like getting two chargers in one. The big question is - but does it charge good? yes very good, its much better than my iSDT Q6 pro and my others, its my best lipo charger so far, for the cost it brings a lot of value. Its very accurate, it displays 3 digits past the decimal point 4.200v , you can also calibrate it if needed, but if you do, use an accurate DMM like the Aneng Model 8008, 9999 counts accurate, this is my best accurate DMM I use, yes it also does the 3 digits past the decimal point, like this, 4.200v or 3.850v readings. Over all I like this Lipo Charger, it charges very good, and also discharges very good. Thank you for a good deal on a good product. I included a few pics, I charged two 2S 6200mah Ovonic Lipos, in series, so it sees it as one 4S lipo pack. I discharged it down to 3.300v/ per cell, then I Storage Charged it to 3.860v/ per cell, my capacity reads 4.51Ah, then from there I charged it to 4.200v/ per cell capacity reading 1.86Ah, so if you add 4,510mah and 1,860mah = 6,370mah Capacity, or 6.37Ah Capacity, so I got 6,370mah charge on my Ovonic 6200mah Lipo batteries. Very pleased with the accuracy on this charger.

B
B.
Superb field charger

It's hard to believe how much power can be packed into such a small package these days. I picked up the M6D as a field charger. With dual ports it's easy to keep up with whatever I want to fly. So far it seems to deliver exactly as promised. Incredible value.

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
R.J.
Awesome charger with a lot of features

I'm using this as a field charger and this is awesome. Plugged into my car I can set the minimum input voltage to 10.5 volts so I don't have to worry about draining my car battery too low. 500W output is more than I'll need but great charger. I really like that this measures internal resistance. I've retired a couple packs because I can see that the resistance of once cell is higher than all the others. Super easy to use and monitor lipos. I wish the colored outline of each channel was easier to see so you could see which channel you were in a little better but that's a minor complaint. Definitely buy this charger.

C
C.s.

Great communication and prompt delivery.

V
V.G.
Awesome

Great service all around with progressive fast shipping and responce

M
M.M.
Good Lipo Charger - its Two Chargers in One

Works Great - the New ToolKitRC M6D, it is a Professional Lipo Charger, its a dual charger so its like getting two chargers in one. The big question is - but does it charge good? yes very good, its much better than my iSDT Q6 pro and my others, its my best lipo charger so far, for the cost it brings a lot of value. Its very accurate, it displays 3 digits past the decimal point 4.200v , you can also calibrate it if needed, but if you do, use an accurate DMM like the Aneng Model 8008, 9999 counts accurate, this is my best accurate DMM I use, yes it also does the 3 digits past the decimal point, like this, 4.200v or 3.850v readings. Over all I like this Lipo Charger, it charges very good, and also discharges very good. Thank you for a good deal on a good product. I included a few pics, I charged two 2S 6200mah Ovonic Lipos, in series, so it sees it as one 4S lipo pack. I discharged it down to 3.300v/ per cell, then I Storage Charged it to 3.860v/ per cell, my capacity reads 4.51Ah, then from there I charged it to 4.200v/ per cell capacity reading 1.86Ah, so if you add 4,510mah and 1,860mah = 6,370mah Capacity, or 6.37Ah Capacity, so I got 6,370mah charge on my Ovonic 6200mah Lipo batteries. Very pleased with the accuracy on this charger.

B
B.
Superb field charger

It's hard to believe how much power can be packed into such a small package these days. I picked up the M6D as a field charger. With dual ports it's easy to keep up with whatever I want to fly. So far it seems to deliver exactly as promised. Incredible value.

Your cart

×